MENU

iSW 35S-10/17 AC powered Tubular Motor ( Z-Wave compatible ) with brackets and idle end unit

iSW 35S-10/17 AC powered Tubular Motor ( Z-Wave compatible ) with brackets and idle end unit
iSW 35S-10/17 AC powered Tubular Motor is a standard tubular motor, it means it hasn't built in receiver inside, it can't control by the remote, it has four wires, so it only can be control by wall switch like DC865A Double button Mechanical rebound Switch or DC866A Double button mechanical Non-reboundable switch. Meanwhile you can control this tubular motor via Fibaro Roller Shutter Z-Wave module and DC865A switch or DC866A switch.

• Standard type tubular motor with the diameter of 35mm, available for motorized roller blinds
• DM35S super narrow: the length of the tubular motor is only 480mm
• Products with wide series are applicable to various configurations such as Z-Wave
• To adjust limit with knob

This iSW35S tubular motor has 4 wires which two wires control two directions, so it can connect with the Z-Wave roller blind module like Fibaro Roller Shutter 2 etc. because this motor is standard tubular motor, it has the mechanical limit switch, so the Z-wave control system can do the auto calibration without the problem, it means you can control the blind with percentage ( Position ), what you need to do is using the switch to set up the up and down limit position first without connecting the Z-Wave module before you start to do the auto calibration.

This tubular motor will come with idle end unit which fits with 47mm aluminium tube and two side brackets which can be used for the outdoor roller blind etc.

please note, the drive wheel adaptor which this tubular motor comes with will work with the 47mm (Outside Diameter) Aluminum Tube, Please refer the second and third photo for the 47mm tube type and the 7th photo for the drive wheel adaptor which comes with the motor, please check it before make the order.

Please note: this 35mm tubular motor is not suitable for retrofitting your existing roller blind due to the size of the limit switch head, its reduction is different from you existing ones.

For those customer who prefer this iSW 35S tubular motor which are fully compatible Z-Wave roller blind module, we can custom made the roller blind for you and we will guarantee our roller blind will be fitted with our this iSW 35S tubular motor, please go to the other iSW35S listing for other type the limit switch head of iSW35S tubular motor.
RRP:
NZ$ 189.00
Limited Stock:
Only 30 remaining at this price
Price:
NZ$ 151.20
Shipping:
NZ$ 6.00
Purchase Qty:
 

We provide 3 year warranty for this tubular motor.

Rated Torque : 10 Nm

Rated Speed : 17 rpm

Motor tube Diameter : 35mm

Power input : 220/230V  50/60 Hz

Degree of Protection : IP44

Maximum running time:  4 minutes 

Contact Details

Phone:022 4118500
Email:info@ismartwindow.co.nz

Request More Information

Details of the product above will be automatically included with your enquiry.