MENU

Polk Audio RC80i 2 way In-Ceiling Speakers ( A pair )

Polk Audio RC80i 2 way  In-Ceiling Speakers ( A pair )
The Polk Audio RC80i 2-way in-ceiling loudspeaker delivers incredible stereo sound to any room in your home from speakers you can barely see, without using any floor or shelf space. The RC80i is easy to install, requiring only that you cut a hole, feed the wires through, and simply drop the speaker in. It is held in place by rotating cams that safely secure the speaker with no extra assembly or mess. Once installed, the paintable grille and flange allows this in-ceiling speaker to virtually disappear in the room The Polk RC80i uses an eight-inch dynamic-balance, mineral filled polymer-composite cone with a rubber surround that outlasts cheaper foam surrounds, as well as a one-inch metalized soft dome tweeter with a 15-degree swivel mount. This makes the tweeter aimable for direct high frequency control that ensures spacious imaging with amazing clarity. The sound is well-balanced in any listening position, even off-axis. Constructed of rust resistant hardware and durable, moisture resistant materials, the RC80i is safe for use in bathrooms, kitchens, saunas, or even under outdoor eaves. The RC80i features strong composite driver baskets that keep moving parts in rigid alignment, and a wide-dispersion design for even sound-coverage throughout large rooms. This in-ceiling loudspeaker is timbre-matched to the Polk Audio RTi Series for seamless, enveloping imaging when used in a home theater system.

What's in the Box
RC80i speakers (pair), 2 grilles, 2 cardboard templates with paint masks, owner's manual, and registration card.
RRP:
NZ$ 499.00
Limited Stock:
Only 1 remaining at this price
Price:
NZ$ 399.20
Shipping:
NZ$ 15.00
Purchase Qty:
1
 

technical specifications

Driver Complements
Tweeter 1" Diameter (2.54cm) 
Dynamic Balance tweeter with metalized 
soft dome in ball-and-socket swivel mount
Mid/Woofer 8" Diameter (20.32cm) 
Dynamic Balance driver with mineral-filled 
polymer cone and rubber surround
Electrical
Total Frequency Response 35Hz - 20kHz
Upper -3dB Limit 20Hz
Lower -3dB Limit 50Hz
Nominal Impedance 8 ohms
Efficiency 90 dB
Recommended Amplifier Power 20 - 100 Watts per channel
Inputs Spring-loaded clips
Dimensions
Overall Depth 3 5/8" (9.21cm)
Overall Diameter 10 3/4" (27.30cm)
Shipping
Unit of Measure Pair
Total Shipping Weight 10 pounds
Installation
Cut-Out Diameter 9 3/8" (23.81cm)
Mounting Depth (assumes 1/2 in) 3 1/8" (7.94cm)
Pre-Construction Bracket PB LC80i

technical specifications

Driver Complements
Tweeter 1" Diameter (2.54cm) 
Dynamic Balance tweeter with metalized 
soft dome in ball-and-socket swivel mount
Mid/Woofer 8" Diameter (20.32cm) 
Dynamic Balance driver with mineral-filled 
polymer cone and rubber surround
Electrical
Total Frequency Response 35Hz - 20kHz
Upper -3dB Limit 20Hz
Lower -3dB Limit 50Hz
Nominal Impedance 8 ohms
Efficiency 90 dB
Recommended Amplifier Power 20 - 100 Watts per channel
Inputs Spring-loaded clips
Dimensions
Overall Depth 3 5/8" (9.21cm)
Overall Diameter 10 3/4" (27.30cm)
Shipping
Unit of Measure Pair
Total Shipping Weight 10 pounds
Installation
Cut-Out Diameter 9 3/8" (23.81cm)
Mounting Depth (assumes 1/2 in) 3 1/8" (7.94cm)
Pre-Construction Bracket PB LC80i