iSW 25DB 1.1N/40R 24V Tubular Motor and DC1686A single-channel DC receiver

iSW 25DB 1.1N/40R is a 24V DC tubular motor. Although there is a built-in Limit Switch, there is not a built-in transformer and RF receiver, so for the best of result we recommend it to be used in conjunction with a DC1686A single-channel DC receiver which contains the DC24V transformer. Meanwhile, it's not only a switch that you can control the roller blind up and down or stop, but also you can use the traditional handheld RF remote control to control roller blind through it because it's a receiver. Meanwhile, through the switch, you can connect your third party low voltage (24V) relays or module to control it via your existing automation system - please check the drawing about the wiring connection. Because the length of this 25DB tubular motor is quite short (285mm), it's also suitable to very narrow roller blinds such as those of 350mm width.

The two very good things are the type of the limit switch head of this model is suitable for the size of all of New Zealand market roller blind brackets, meanwhile we can supply you with the drive wheel adaptor for both of 38mm and 45mm outside diameter roller blind tube.

This listing contains one DM25DB 24V DC tubular motor and one DC1686A DC receiver and DC68 switch flush box.