iSW 28LEQ-2/28 Built-In Lithium Ion Battery Tubular Motor
In these uncertain times, we thank you for your patience and understanding. For now, stay safe and all the best.
The built in Lithium battery has the ability to be fully charged up to 500 cycles. You can use the electric charger or solar panel charger to charge the battery once every 3~5 months, the lithium ion battery can achieve an outstanding up to up and down 600 times per fully charge depending on the weight and the size of the roller blind.
It comes with a standard drive adapter and crown which are only suitable 45mm aluminium roller blind tubes. Please check the last photo for your reference. For the customer who order the roller blinds through us, the diameter of aluminium tube for all of the roller blinds whatever how small of the blind will be 45mm.
It's rated torque is 2 Nm and rated speed is 28 rpm, therefore for the 45mm tube, its lift capacity can reach 8 kg. If you use the 480g/m2 roller blind fabric with the weight of the bottom bar being 2 kg, then the maximum size of the roller blind would be 3.6m(W) X 3.5m(H) after deducting the weight of the bottom tube.
This tubular motor has the capability to drive quite a large size of roller blinds, so it can drive two even three roller blinds to joint ( link) together up to 3.6m total width in the same time through just one of this iSW DM28LEQ-2/28 Built-In Lithium Ion Battery Tubular Motor.
Built-in lithium battery operated tubular motors don't need wiring nor an electrician, so this model is particularly suitable for long sizes of roller blinds, for those blinds on high and hard to reach positions, you have the choice of a solar charging panel, good for open void halls, lobbies and commercial showrooms, offices etc.
This is for the motor only, you will also require a remote and a charger to operate, however you only need one charger per home and a single multi channel remote can control multiple blinds. You can use the same charger DC1563AU as DM25LE for iSW 28LEQ model of Li ion battery powered tubular motor.
For those customer who are going to order new custom made roller blind and tubular motor together through us, we will supply you 45mm aluminium tube for all of your roller blind whatever how small of your blind, so we will supply you this tubular motor with 45mm drive wheel adaptor and crown without problem.
Considering to the labour cost of the electrician, the Li-ion rechargeable battery powered motor will be better option, the cost of two option will be similar, it will not only looks better, meanwhile but also the quality of li-ion battery is getting better and better now in this day, the lifetime of Li-ion battery will last much longer than before, the only thing you need to do is you should remember to charger the battery once every 6 months at least to maintain the Li-ion battery in good performance.
We provide 3 Years wanrantty for the Tubular Motor.
Rated Torque : 2.0 Nm
Rated Speed : 28 rpm
Motor tube Diameter : 28mm
Power input : Built-in Lithium Battery, connect to recharger ( Option,purchase seperately ) when battery's power is low or connect to solar recharging panel (Option,purchase seperately )
Degree of Protection : IP44
Maximum Number of Turns : Unlimit
Minimum width of the roller blinds: 720mm
Request More Information
Details of the product above will be automatically included with your enquiry.