MENU

35R-10/17 Radio Tubular Motor

35R-10/17 Radio Tubular Motor
35R-10/17 is a AC Tubular Motor which has built-in radio receiver,it needs to be connected to 100~240 V / 50 Hz,60 Hz AC power point or permanent connection unit. It comes with the both side brackets and the standard 47mm roller blind aluminium tube drive adapter and idler (check with picture).for other diameter larger than 47mm size or other different kinds of the aluminium tube,please send me the enquiry form include the drawing or photos and the accurate measure of your existing tube, we will find out what we can do for you, we might special design and custom build the drive adapter; crown and idler for you.
Its rated torque is 10 Nm,so it can drive quite large size of the roller blind without any problem.
Because it's AC Motor, they have thermal protection limit.it has Maximum Number of Turns is 39 turns,so for the 47mm or 50mm roller blind tube, the maximum height of roller blind would be around 6m.

Please Note: Because you need to use special design brackets to work with these tubular motors, the gap between the window side panel with the roller blind fabric is a bit of larger than usually,total the gaps of the both side is around 5.5~6.0 cm, it is not suitable for DIY retrofitting the existing roller blinds to motorised ones,it's better to be used for the brand new and larger diameter size of the aluminium tube like 47mm; 50mm or above,so the width of the Tube and Fabric would be considered accordingly.
RRP:
NZ$ 209.00
Price:
NZ$ 167.20
Shipping:
NZ$ 6.00
Purchase Qty:
 

We provide 3 Years wanrantty for the Tubular Motor.

Rated Torque : 10 Nm

Rated Speed : 17 rpm

Motor tube Diameter : 35mm

Power input : 220/230V  50/60 Hz

Degree of Protection : IP44

Maximum Number of Turns : 39