25TE- 0.7/20 DC Tubular Motor

25TE- 0.7/20 DC Tubular Motor
25TE-0.7/20 DC Tubular Motor has a built-in transfer, all you need is to be connected to a 100~240 V / 50 Hz,60 Hz AC power point or a permanent connection unit. It has a built-in electronic radio receiver and an electric limit function. DC motors are extremely quiet and have an unlimited amount of turns unlike the AC tubular motor.
It comes with the standard driving wheel (adaptor) and crown which are only suitable for 38mm roller blind tubes.
It's rated torque is 0.7 nm and rated speed is 20 rpm, therefore for the 38mm tube, its lift capacity with standard adapters is around 2.6 kg. If you use the 400g/m2 roller blind fabric with the weight of the bottom bar being 1 kg, then the maximum size of the roller blind would be 1.8m X 2m after deducting the weight of the bottom tube.
For those size of the roller blinds are bigger than 1.8mX2m or using thick and heavy roller blind fabric,then we recommend you to choice iSW 25TE-1.5/32 tubular motor which its rated torque is 1.5 Nm.
NZ$ 179.00
NZ$ 6.00
Out Of Stock

We provide 3 Years wanrantty for the Tubular Motor.

Rated Torque : 0.7 Nm

Rated Speed : 20 rpm

Motor tube Diameter : 25mm

Power input : 220/230V  50/60 Hz

Degree of Protection : IP44

Maximum Number of Turns : Unlimit

Minimum width of the roller blinds: 470mm

Contact Details

Phone:022 4118500

Request More Information

Details of the product above will be automatically included with your enquiry.