iSW 35SL-10/17 35mm AC powered 4 wires standard tubular blinds motor ( Home Automation compatible )

iSW 35SL-10/17 35mm AC powered 4 wires standard tubular blinds motor ( Home Automation compatible )
iSW35SL-10/17 35mm AC powered 4 wires low noise tubular blinds motor is a standard tubular motor, it can only be controlled by the wall stwitch or Z-Wave or C-Bus etc. Home Automation system.

iSW35SL-10/17 35mm AC powered blinds motor is similar to iSW35S-10/17 motor, the only difference is it's low noise model.

• Standard type tubular motor with the diameter of 35mm, available for motorized roller blinds
• DM35S super narrow: the length of the tubular motor is only 510mm, minimum width of roller blind is 580mm.
• Products with wide series are applicable to various configurations such as Z-Wave
• To adjust limit with knob

Warning:
Danger of electrocution !
All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations.
Even when the device is turned off, voltage may be present at its terminals. Any works introducing changes into the configuration of connections or the load must be always performed with disconnected voltage (disable the fuse).
RRP:
NZ$ 209.00
Limited Stock:
Only 80 remaining at this price
Price:
NZ$ 188.10
UOM:
pcs
Purchase Qty:
 

3 years warranty for this tubular motor.

Rated Torque : 10 Nm

Rated Speed : 17 rpm

Motor tube Diameter : 35mm

Power input : 220/230V  50/60 Hz

Degree of Protection : IP44

Maximum running time:  4 minutes 

Contact Details

Phone:022 4118500
Email:info@ismartwindow.co.nz

Request More Information

Details of the product above will be automatically included with your enquiry.