iSW 25DB-1.1//40 DC24V Tubular Motor for Blinds

iSW 25DB-1.1//40 DC24V Tubular Motor is a standard DC tubular blinds motor, DC 24V input, and electronic limit switch, but no built in RF receiver, so you need to use the DC128 DC manual switch or our DC1686A single-channel DC receiver to control it.

If you use the DC128 switch, then you can combine it to use with our Qubino Flush Shutter DC module, so you can control the motor further via Z-Wave smart home system. We strongly recommend you buy our iSW DM25DB-1.1/40 24V DC tubular Motor and Z-Wave control Kit if you prefer this option.

This motor comes with the drive wheel adaptor and crown for a 45mm roller blind tube. For those customer who are going to order new custom made roller blind and tubular motor together through us, we will supply you 45mm aluminium tube for all of your roller blind whatever how small of your blind, so we will supply you this tubular motor with 45mm drive wheel adaptor and crown without a problem. we can replace them with the drive wheel adaptor and crown for 38mm tube or other size tube for free of charger, but please contact us before you order.

Meanwhile this tubular motor uses the latest limit switch head which most of the roller blind bracket in NZ can insert into the slot in the limit switch head.

Since this iSW DM25DB tubular motor use 24V DC power, so it can not only be used for the resident, but also it can be used for the roller blind for caravan.