82TS curtain motor are fully compatible with Fibaro Roller shutter 2 Z-wave module without of any issue. We have tested all of Fibaro RS2 , Qubino Flush shutter and TBK roller shutter controller with 82TS curtain motor before, sometimes we confused each other, now we can confirm the Fibaro Roller Shutter 2 Z-Wave module is fully compatible, the other two are not. So from now on, if you want to use the Z-Wave module to control the motorised curtain track, we will recommend you to use the 82TS 4 wires standard curtain motor with Fibaro RS2 module, it can do auto calibration and position controlling through the Z-Wave controller.
Programing and setting are pretty simple and easy:
1, Q1 of the Z-Wave module should connect to the black colour wire on the 82TS motor, Q2 should connect to the Brown colour wire on the motor, to make sure the moving direction will match the direction on the interface of the Z-Wave controller ;
2, To set up the limit position, click the open (up) button on the interface of the Z-Wave controller, the tackle will hit the side edge once, then click the close (down) button, for the two way curtain track, the two tackle will hit each other in the middle of the track, for the one way track, the tackle will hit the other side edge once, then the 82TS will remember the limit position automatically;
3, Click calibration button on the interface of Z-Wave controller, the motorised curtain track will automatically fully open, fully close and fully open again. All done, it's pretty simple.
4, In case of the power blackout, then if you pull the tackle by hand or you remove the motor from the track, move the tackle, the limit position will be changed, then you need to reset the limit position again,
you just need to click the open and close button a couple times, the limit position will be set up again, carry on number 3 step again, then it will be all good again.
By the way, there is another good news, as you know the Trust Smart Home controller ICS-2000 can control the Somfy RTS type tubular motor, since most of our tubular motor can add another 433 MHz remote after you set up a remote with tubular motor, the method of adding another remote is exactly the same with the method of adding a device of Trust smart home hub, you can choose through the GAMMA (TrenDIY/Brel) brand not Somfy, just press twice of P2 button on the back of our existing remote and then click the Connect button on the Trust smart home app,then you can start to control your our brand of motorised roller blind through the Trust smart home app now. For more information of the Trust smart home hub, you can check: https://www.trust.com/en/product/71110-octopus-internet-control-station-ics-2000
The Trust control station ICS-2000 can integrate with Amazon Alexa and Google home now.
Posted: Fri 09 Nov 2018